Buy Now Work Sharp WS3000 Wood Tool Sharpener We Compare and Choose Low Prices to offer You Here!
The Work Sharp 3000 wood tool sharpener lets you monitor stock removal from above with the "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air cThe Work Sharp 3000 wood tool sharpener lets you monitor stock removal from above with the "see-through" wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air c... Read More
Customer Reviews
what can you add
This is easily the best value best performing sharpener available.Yes if you are an expert stone man and have trained under a master then the various types of stone sharpening are probably better but in todays world the 95% plus job that the WS2000 does is really excellent.The auto 25 degree chisel slot is fantastic.I have spent time and money on other methods but they don't stack up.Get the WS2000 you won't be sorry.
Work Sharp 2000
This works as described. I've sharpened my wood turning tools and gardening shears with this. Worked great and fast on every tool. No overheating if done properly. I like sharp tools fast and this does just that. I couldn't justify the extra money for the 3000. I think this dry sharpener will satisfy most wood workers.
The quickest way to ridiculously sharp edges - once you invest in a few improvements.
I've been sharpening my chisels and plane blades using waterstones and a leather strop for a couple of years now. The results are absolutely incredible, but the process is time-consuming - especially when lapping, sharpening and honing a brand new tool. So searching for a faster method, I purchased a Work Sharp WS3000 and set out to sharpen a brand new chisel. I eventually ended up with an edge that was just as sharp as the ones I get with my waterstones and strop, but not before I solved a few issues with the system:
1) The first thing I noticed was that, since the abrasive runs faster the farther you get from the center of the wheel, flattening the backs of wide blades takes a little practice. It's really not a big deal at all to compensate for this, but I haven't seen it mentioned in other reviews so I thought I'd bring it up. Pretty soon I got the hang of it, though, and learned exactly where to put the pressure on the blade to get it dead flat.
2) The 400-grit abrasive on the bevel-sharpening port under the wheel is too coarse once you get to the higher grits. I ended up ripping it off, sanding the port smooth and waxing it. Now I just remove the burr off the back of a tool on the top side of the wheel.
3) The sanding discs that come with the tool are nowhere near sufficient to get truly sharp edges. My solution was to order some 4000- and 8000-grit Micro-Mesh sanding discs directly from the manufacturer. I also purchased an extra wheel, so now I have a 150/220-grit wheel for lapping blade backs, and 400/1000-grit and 4000/8000-grit wheels for sharpening. After the 8000-grit, I give the edge a couple of swipes on a strop loaded with Herb's Yellowstone honing compound (I don't have the leather wheel that they sell as an accessory, but it sure looks intriguing...)
4) Laying a blade flat on the spinning wheel is tricky: you risk putting the tip down first and destroying the edge, or resting the back on the edge of the wheel and getting an ugly gouge in your tool. It's a lot easier to lay the blade flat on the wheel while it's stopped, holding it securely with both hands and then starting the motor. The only problem is that the power switch on the unit is somewhat inconveniently placed for this. A foot switch solves the problem.
After dealing with these issues, I'm getting edges that are completely indistinguishable from sharpening up to an 8000-grit waterstone and hitting the strop - but without the mess and much, much quicker. The whole process is scary fast: I finished sharpening a set of 6 chisels in less time than it takes me to sharpen a single one on the waterstones! If I was reviewing the system after my fixes, instead of the way it comes out-of-the-box, this would be a 5-star review.
I should also mention that my unit came with a chipped glass wheel, but the nice folks at Darex were incredibly helpful and shipped me out a new wheel within 24 hours of emailing them. Great customer service!
No comments:
Post a Comment